Northern Industrial Heavy-Duty Electric Hoist - 2000-Lb. Capacity

Northern Industrial Heavy-Duty Electric Hoist - 2000-Lb. Capacity Review

Northern Industrial Heavy-Duty Electric Hoist - 2000-Lb. Capacity Feature

• 110V, single-phase 2.25 HP motor
• Antitwist cable
• 51in. remote cord
• S-3 20% duty service
• Complies with IP54 and IP65 standards

2000-lb. load capacity (double line) hoist with remote switch, 39ft. cable with cable guard, stopper and hook with safety latch. Great for lifting engines, tables, lumber, shop equipment and a whole range of other products. The biggest advantage to this hoist is that you do not need to climb a ladder and crank a lever; you can remain on the ground to control operations. Volts: 110, Amps: 17, Single Line Lift Capacity (lbs.): 1,000, Double Line Lift Capacity (lbs.): 2,000, HP: 2 1/4, Lift Height (ft.): 36 - single line, 18 - double line, Lifting Speed (FPM): 33 minimum - single line, 16 1/2 minimum - double line, Cable Length (ft.): 39, Cable Diameter (in.): 6/25, Duty Cycle (min.): 10, Dimensions L x W x H (in.): 19 3/4 x 7 9/10 x 11

Remington Gambrel and Hoist System (17309)

Remington Gambrel and Hoist System (17309) Review

Remington Gambrel and Hoist System (17309) Feature

• 400-lb working load
• Steel construction
• Includes block and rope
• Folds for storage

This Remington Takedown Gambrel and Hoist Kit takes the hassle out of hanging. Turn your trophy into a load you can handle. The 6-to-1 pulley system in this Kit takes 5/6 of the weight off any carcass for easy back and shoulder-saving lifting. Heavy-duty steel construction. Safely handles weight loads up to 440 lbs and the Gambrel breaks into halves for easy, compact transport and storage.

Chicago Electric Power Tools 440 Lb. Electric Hoist with Remote Control

Chicago Electric Power Tools 440 Lb. Electric Hoist with Remote Control Review

Chicago Electric Power Tools 440 Lb. Electric Hoist with Remote Control Feature

• Single-line capacity: 220 lbs.
• Double-line capacity: 440 lbs.
• 38 ft. of 1/8" diameter high-carbon steel aircraft cable
• 5.5 ft. remote-control cord for power up/power down
• 33 ft. per minute;

Heavy load needs lifting? This 440 lb. capacity Electric Hoist with remote control handles it easily It's a safer way to - Visit Harbor Freight Tools For More Information.

Delta El Greco Ceiling Hoist

Delta El Greco Ceiling Hoist Review

Delta El Greco Ceiling Hoist Feature

• Efficient pulley system helps lift and lower heavier objects
• Clever auto-locking mechanism prevents accidental release
• Engineered for long durable performance, finished in tough silver powder coat
• Max load 50-pounds

The Delta El Greco Ceiling Hoist is a pulley system used to store bikes

Harrington LX003 Die Cast Aluminum Lever Hoist, 1/4 ton Capacity, 5' Lift Height

Harrington LX003 Die Cast Aluminum Lever Hoist, 1/4 ton Capacity, 5' Lift Height Review

Harrington LX003 Die Cast Aluminum Lever Hoist, 1/4 ton Capacity, 5' Lift Height Feature

• Durable die-cast aluminum body with steel frame is compact and lightweight
• Very low headroom design for use in tight spaces; free-chain mechanism allows for quick adjustments
• Extremely low pulling force is required for operation; weston-style brake is totally enclosed to protect against dirt, dust and rain
• Single step reduction gear assures load holding performance; load chain guide mechanism permits smooth and quiet guiding of chain
• Rubber handle grip for ease of use; effortless to transport, install and store

Harrington’s LX mini puller is lightweight, compact and built to perform. It fits conveniently in a toolbox and will easily handle pulling and moving jobs in many applications including transportation, construction and plumbing. Available in two capacities to fit all applications. The 1/2 ton capacity is unique to the industry. Capabilities: grade 100, nickel-plated load chain is corrosion and wear resistant, strong hook latches include notched tip, 5-foot lift is standard, longer lifts are available in both capacities, a test certificate verifies that every hoist has been factory load tested to 125 percent of rated capacity in accordance with ASME B30.21 requirements. Pull to lift load 40 lbs. Load chain 3.2mm diameter and 1 chain fall line.

Harrington LB015 Steel Lever Hoist, 1-1/2 ton Capacity, 5' Lift Height

Harrington LB015 Steel Lever Hoist, 1-1/2 ton Capacity, 5' Lift Height Review

Harrington LB015 Steel Lever Hoist, 1-1/2 ton Capacity, 5' Lift Height Feature

• Rugged, all-steel construction that actually weighs less than comparable aluminum models
• Get positive braking action with Weston-style load brake incorporating two moisture-resistant brake pads with four braking surfaces, includes two brake pawls for additional reliability
• Enjoy protection against dirt and moisture with a totally enclosed brake mechanism; ensure long life with machined, heat-treated, split load double reduction gears
• Patented spring-loaded freewheel mechanism permits easy adjustment of the load chain and safeguards against accidental freewheeling under load
• Operate in close quarters with short steel handle and 15-degree recovery strokes; equipped with standard rubber grip for non-slip operation

The LB Series of lever hoists offers a low headroom, compact design that is perfect for use in tight quarters. Regarded as the best lever hoist in the industry, our LB is recommended for use in heavy-duty construction work, mining, manufacturing, shipbuilding and day-to-day maintenance and repair. Capabilities: 5-foot lift is standard, 10-, 15- and 20-foot lifts also stocked; nonstandard lifts available as well, grade 100 heat-treated load chain is nickel plated for corrosion resistance, forged and heat-treated alloy steel hooks open slowly without fracturing under excessive loads. Top and bottom hooks rotate 360 degree and test certificate verifies that every hoist has been factory load tested to 125 percent of rated capacity, in accordance with ASME B30.21 requirements. Pull to lift load 64 lbs. Load chain 7.1mm diameter and 1 chain fall line.

Harrington CF005 Hand Chain Hoist, 1/2 ton Capacity, 20' Lift Height

Harrington CF005 Hand Chain Hoist, 1/2 ton Capacity, 20' Lift Height Review

Harrington CF005 Hand Chain Hoist, 1/2 ton Capacity, 20' Lift Height Feature

• Experience exceptional strength with a thick die-cast aluminum body
• Handle tough demands with high-strength, heat-treated main pinion shaft and load gear
• Get positive braking action with Weston-style load brake incorporating two moisture-resistant brake pads with four braking surfaces
• Minimize manual effort thanks to smooth running, pre-lubricated ball bearings and precision machined drive train components
• Simplify maintenance with fewer parts and an easy-to-work-on design

Harrington CF hand chain hoists give you a practical alternative thanks to an economical design using fewer parts for trouble-free service. Outstanding durability is due to a die-cast aluminum body and high-strength, heat-treated main pinion shaft and load gear. Pre-lubricated ball bearings, precision machined gears, and Weston-style load brake make lifting smooth and easy while allowing long service and low maintenance. Capabilities are 10-foot lift is standard, 15- and 20-foot lifts are also stocked; nonstandard lifts and hand chain drops available as well, grade 100 heat- treated manganese alloy load chain resists abrasion and wear while minimizing chain weight, forged and heat-treated alloy steel hooks are designed to open slowly and not fracture under excessive loads and a test certificate verifies that every hoist has been factory load tested to 125 percent of rated capacity, in accordance with ASME B30.16 requirements.

Kayak,Canoe Garage Storage Lift: Hoist/Rack/Bike/Ladder

Kayak,Canoe Garage Storage Lift: Hoist/Rack/Bike/Ladder Review

Kayak,Canoe Garage Storage Lift: Hoist/Rack/Bike/Ladder Feature

• 4 Swivel casters allow for maximum stability & mobility.
• Easy mounting system: separate brackets mount directly to 2x4 joists or to Ceiling.

Easy mounting system: separate brackets mount directly to 2x4 joists or to Ceiling.

R&M Hoists RPT Manual Push Trolley, 1/2 ton Capacity, 2" - 7.88" Beam Flange Width

R&M Hoists RPT Manual Push Trolley, 1/2 ton Capacity, 2" - 7.88" Beam Flange Width Review

R&M Hoists RPT Manual Push Trolley, 1/2 ton Capacity, 2" - 7.88" Beam Flange Width Feature

• Designed for long traversing applications
• Designed for Industrial Use
• Individually serialized with Load Test Certificate
• Crown-tread wheels
• Machined steel wheels

This R&M Hoists Manual push trolley RPT500, 1/2 ton capacity with Adjustable Flange Width from 2.00"-7.88" is designed for long traversing applications suspending both manual and electric top hook hoists.The trolley has crown-tread wheels compatible with W and S beams. Wheel ball bearings are completely sealed and maintenance-free. Easily Adjustable Flange Width for a wide range of flange widths. Safety drop lugs and rubber bumpers are standard. Single flanged machined steel wheels add to the smooth motion.

Troy DPH1116 Professional Series 15 Foot Drywall & Panel Lift Hoist With Extension

Troy DPH1116 Professional Series 15 Foot Drywall & Panel Lift Hoist With Extension Review

Our Troy Drywall Lift is made from an all welded steel construction, tool-free assembly and teardown, single stage winch with brake, and can be used by one person. It has a 11' maximum reach for horizontal ceilings, and 15' maximum reach for walls (determined by the 11' max lift and half the length of drywall). With the extension that is included it makes the lift go 4' higher on walls and ceilings. When the extension is on it can reach 15' maximum reach for horizontal ceilings, and 19' maximum reach for walls. It can hold a 4' x 16' single sheet capacity, with a 150 lbs load rating, has 5-Inch casters, and weighs 110lbs.

Maasdam 48510 Manual Chain Hoist 1 Ton, Black

Maasdam 48510 Manual Chain Hoist 1 Ton, Black Review

Maasdam 48510 Manual Chain Hoist 1 Ton, Black Feature

• Economical Hand Chain Hoist designed for years of trouble free service
• Steel construction with Powder coating
• Lightweight compact design for tight applications
• Needle Bearing for smooth operations
• Completely enclosed Brake system for precise load spotting

Each is specially heat treated to assure many years of service. Thick steel construction prevents damage from impact and extra rough handling.

Harrington LX005 Die Cast Aluminum Lever Puller, 1/2 ton Capacity, 5' Lift Height

Harrington LX005 Die Cast Aluminum Lever Puller, 1/2 ton Capacity, 5' Lift Height Review

Harrington LX005 Die Cast Aluminum Lever Puller, 1/2 ton Capacity, 5' Lift Height Feature

• Durable die-cast aluminum body with steel frame is compact and lightweight
• Very low headroom design for use in tight spaces; free-chain mechanism allows for quick adjustments
• Extremely low pulling force is required for operation; weston-style brake is totally enclosed to protect against dirt, dust and rain
• Single step reduction gear assures load holding performance; load chain guide mechanism permits smooth and quiet guiding of chain
• Rubber handle grip for ease of use; effortless to transport, install and store

Harrington’s LX mini puller is lightweight, compact and built to perform. It fits conveniently in a toolbox and will easily handle pulling and moving jobs in many applications including transportation, construction and plumbing. Available in two capacities to fit all applications. The 1/2 ton capacity is unique to the industry. Capabilities: grade 100, nickel-plated load chain is corrosion and wear resistant, strong hook latches include notched tip, 5-foot lift is standard, longer lifts are available in both capacities, a test certificate verifies that every hoist has been factory load tested to 125 percent of rated capacity in accordance with ASME B30.21 requirements. Pull to lift load 62 lbs. Load chain 4.3mm diameter and 1 chain fall line.