Harrington LB030 Steel Lever Hoist, 3 ton Capacity, 10' Lift Height

Harrington LB030 Steel Lever Hoist, 3 ton Capacity, 10' Lift Height Review

Harrington LB030 Steel Lever Hoist, 3 ton Capacity, 10' Lift Height Feature

• Rugged, all-steel construction that actually weighs less than comparable aluminum models
• Get positive braking action with Weston-style load brake incorporating two moisture-resistant brake pads with four braking surfaces, includes two brake pawls for additional reliability
• Enjoy protection against dirt and moisture with a totally enclosed brake mechanism; ensure long life with machined, heat-treated, split load double reduction gears
• Patented spring-loaded freewheel mechanism permits easy adjustment of the load chain and safeguards against accidental freewheeling under load
• Operate in close quarters with short steel handle and 15-degree recovery strokes; equipped with standard rubber grip for non-slip operation

The LB Series of lever hoists offers a low headroom, compact design that is perfect for use in tight quarters. Regarded as the best lever hoist in the industry, our LB is recommended for use in heavy-duty construction work, mining, manufacturing, shipbuilding and day-to-day maintenance and repair. Capabilities are 5-foot lift is standard, 10-, 15- and 20-foot lifts also stocked; nonstandard lifts available as well, grade 100 heat-treated load chain is nickel plated for corrosion resistance, forged and heat-treated alloy steel hooks open slowly without fracturing under excessive loads. Top and bottom hooks rotate 360 degree and test certificate verifies that every hoist has been factory load tested to 125 percent of rated capacity, in accordance with ASME B30.21 requirements.

Superwinch 1401 AC1000 Series Master Winch

Superwinch 1401 AC1000 Series Master Winch Review

Superwinch 1401 AC1000 Series Master Winch Feature

• Operates on standard house current: 115-Volts AC, 50/60 hz with 1,000-lb capacity
• Wire rope measures: 45' x 5/32"
• Dimensions measure: 13.38"l. x 5.38"d. x 5.69"h; 18-lbs
• 6’ Remote Control; Powers in and Powers out
• Wire rope Tension Plate; Powers in and Powers out

The Superwinch AC1000 Winch is designed for fast-and-easy installation, and can be used for those winching applications where AC power is the only option. This winch has been designed to run off of a standard household current and is the perfect solution for your light-duty winching needs. The 115V AC 50/60 hz winch features a 0.6 horsepower electric motor, and a 6-foot hand-held pendant switch with a interlocking push button station. This winch will hold a rated line pull of 1000 pounds.

The Superwinch also features a wire rope tensioning plate, and a full-load dynamic brake. It also includes a handsaver for added safety.

Superwinch Brand: Power when you need it, where you need it.

Multiple Uses: Used for any light-duty applications where AC power is the only option.

Standard Features    Power In and Power Out    6' (1.82m) Control Pendant    Operates on Standard House Current    Handsaver    Wire Rope Tensioning Plate   Performance 115VAC (1st layer on drum)    Line Pull    lbs./kg Line Speed FPM (m/m) 1401 Motor Amps                   0 23.0 (7.0)   3.0       250 (113) 19.0 (5.8)   5.0       500 (227) 17.0 (5.2)   7.0       750 (340) 15.0 (4.6)   8.0    1,000 (454) 13.0 (4.0) 10.0   Specifications    Rated Line Pull (Single Line) 1,000 lb. (454 kg)    Motor 0.6 horsepower    Gearing Differential Planetary    Gear Ratio 1401 - 123:1    Braking Dynamic    Wire Rope 5/32" x 45' (3.9mm x 13.7m)    Dimensions 1401 - 13.38"l. x 5.38"d. x 5.69"h.             (340mm l. x 137mm d. x 145mm h.)      Drum Diameter/Length 1.25" / 2.6" (31.8mm/66mm)    Weight 1401 - 18 lb. (8 kg)   Recommended Accessories    Pulley Block 2227A    Roller Fairlead 1560A    Accessory Kit 1554

Superwinch AC1000 Series Master Winch is designed to be compact and dependable for all the vehicles utility needs. It can also be used efficiently at workshops, trailers and for jobs around the house. This winch features mechanical and dynamic braking. It comes complete with a 6-foot handheld remote switch and a cable tension plate for ease of use. This winch is engineered with high-efficiency low amp draw motor and protected circuit breaker. It is pre-mounted and sealed to protect from elements. It is backed by 1 year warranty for defects in materials and workmanship.

New 2 Ton Engine Hoist Cherry Picker Ship Crane Folding Lift

New 2 Ton Engine Hoist Cherry Picker Ship Crane Folding Lift Review

Best Choice Products is proud to present out brand new 2-ton engine hoist. This 2-ton engine hoist features a low clearance, a push handle with rubber grips for easy maneuvering, and a 4-position boom. They use an 8-ton power unit with a quick lift and heavy-duty wheels and casters. When done using it, simply collapse your hoist and put it neatly in a corner of your garage. We purchase our products directly from the manufacturer, so you know you're getting the best prices possible.

NEW PRODUCT WITH FACTORY PACKAGING (not used or refurbished)

FEATURES:

360 Degree Rotating Wheels

1/4" High Quality Steel

4000 lb closed boom capacity

1000 lb extended boom capacity

8 ton ram hydraulic cylinder

Closed boom height is 4' and max open boom height is 8'6". Bottom of the hook will reach up to 8'

The folded dimensions are (31" Length ),(29" Width), (50" Height)

Neiko 1-Ton Chain Hoist, 15 ft lift

Neiko 1-Ton Chain Hoist, 15 ft lift Review

Neiko 1-Ton Chain Hoist, 15 ft lift Feature

• Mechanical load brake when lifting
• Heavy duty chain made with 20MN2 premium alloy steel, black oxide finish heat treated
• Swivel hook with safety latch
• Heat-treated forged and milled carbon steel gear
• Cold rolled steel hoist cover

Heavy duty chain made with 20MN2 premium alloy steel, black oxide finish heat treated. 1-ton capacity, 15 foot lift

JET 1SS-3C-15 1-Ton 3 Phase 15-Feet Lift Electric Hoist

JET 1SS-3C-15 1-Ton 3 Phase 15-Feet Lift Electric Hoist Review

JET 1SS-3C-15 1-Ton 3 Phase 15-Feet Lift Electric Hoist Feature

• Designed for commercial and industrial applications
• 1/2-ton to 5-ton capacities, single or three phase models
• 10-Feet, 15-Feet, 20-Feet, lifts standard, custom lifts available
• Easy to install, inspect and maintain
• Totally enclosed steel plate construction with a durable powder coat finish. Gear train features lifetime lubrications, no oil change required

The JET electric hoist is designed for commercial and industrial applications. The totally enclosed steel plate construction and durable powder-coat finish gives you years of durable service. Lift Capacity (tons): 1, Lift Height (ft.): 15

Neiko 1-Ton Chain Hoist, 20 ft lift

Neiko 1-Ton Chain Hoist, 20 ft lift Review

Neiko 1-Ton Chain Hoist, 20 ft lift Feature

• Mechanical load brake when lifting
• Heavy duty chain made with 20MN2 premium alloy steel, black oxide finish heat treated
• Swivel hook with safety latch
• Heat-treated forged and milled carbon steel gear
• Cold rolled steel hoist cover

Heavy duty chain made with 20MN2 premium alloy steel, black oxide finish heat treated. 1-ton capacity, 20 foot lift

CM BEHC0216-ZHK-3LB Budgit Electric Chain Hoist, 2 Ton Capacity, 23' Lift Height, 16FPM Lift Speed, 2-1/2HP, 230/460V

CM BEHC0216-ZHK-3LB Budgit Electric Chain Hoist, 2 Ton Capacity, 23' Lift Height, 16FPM Lift Speed, 2-1/2HP, 230/460V Review

CM BEHC0216-ZHK-3LB Budgit Electric Chain Hoist, 2 Ton Capacity, 23' Lift Height, 16FPM Lift Speed, 2-1/2HP, 230/460V Feature

• Gearing totally enclosed in oil-bath lubrication for long life, High-torque H4 rated heavy duty motor with Class 'F' insulation with thermal actuated switches embedded in the motor winding for protection from overheating
• Weatherproof NEMA-4X enclosed push-button control station, Paddle type upper and lower control limit switch
• Powder coat finish provides long lasting durable finish and added resistance to corrosive environments
• Manguard overload protection prevents lifting excessive loads
• All hoists are built in compliance to ASME/ANSI B30.16 & ISO certified and NEC electrical codes
• Load brake included
• 5 feet of power supply cord
• 19 feet pendant drop

Budgit Manguard Hoists are designed for H4 duty, which means most heavy-duty industrial applications. Budgit's range of specifications and features have made it the perfect solution for thousands of hoists sold in industries such as automotive, machine shops, chemical plants, marine etc.

Rope Pulley Block and Tackle Hoist

Rope Pulley Block and Tackle Hoist Review

Rope Pulley Block and Tackle Hoist Feature

• Rugged 2 1/2" nylon pulley
• 65 feet of poly rope
• 7:1 lifting ratio power
• 2 ton working load capacity
• 4 Wheel

2 ton hand block and tackle (4000 pounds) capacity four wheel rope pully hoist.

Garage Gator GGR220 220-Pound Capacity Residential Motorized Storage System

Garage Gator GGR220 220-Pound Capacity Residential Motorized Storage System Review

Garage Gator GGR220 220-Pound Capacity Residential Motorized Storage System Feature

• Easy to install
• Holds up to 220-Pound
• Holds up to 8 bikes
• Remote keylock safety control

The Garage Gagtor 220 motorized storage system holds a wide variety of items such as bicycles, golf clubs, tires, ladders, tools, sports equipment, and many other things that take up space on your garage floor.

Neiko 440 Lb. Electric Hoist - With Remote Control

Neiko 440 Lb. Electric Hoist - With Remote Control Review

Neiko 440 Lb. Electric Hoist - With Remote Control Feature

• Double Line Capacity: 880 Lb. / Single Line Capacity: 440 Lb
• Voltage: AC 110V, 1-1/8 hp motor, 800 Watts
• Line Speed: 33 ft. per minute
• Mount Bracket Included

Perfect for your machine shop or monster garage to lift any heavy equipment or tools. Double Line Cable: 880lb. Single Line Cable: 440lb. Remote Control Cable: 5'5". 110V, 60Hz, 1-1/8 hp motor delivers a line speed of 33ft per minute. Comes with a Heavy Duty Snap Hook, mount bracket included!

Case of (2) Bike Lift Hoists Ceiling Garage Bicycle Puller Mount

Case of (2) Bike Lift Hoists Ceiling Garage Bicycle Puller Mount Review

With our bike hoist, you can now have extra room for your bicycle in your garage or storage room. Our hoist comes with smooth pulleys and claws for easy lifting, and ropes with safety lock to prevent accidents. Safety is a priority, and with an integrated locking rope clamp, the nylon rope is secured each time you pull it when lifting or lowering your gear. The 2-rope system gives you more control over the load being lifted, and the included heavy-duty, adjustable belly straps can convert the hoist for lifting kayaks, canoes, extension ladders, car top carriers and other gear.

FEATURES:

(2) Bike Lifts

Suitable for Lifting Up to 13ft High.

Weight Capacity: Up to 100lbs

(4) Smooth Pulleys and Claws for Easy Lifting Bicycles

(4) Double Hooks Comes with Scratch Free Rubber Coating

Includes Rope with Safety Lock for Accident Prevention

Fully Adjustable Straps, Which Makes it Easy to Lift Up and Down

Can be Mount it on a 2" x 4" Wood in Storage Rooms or Garages

Easy to Use and Install

INCLUDES:

(2) Set of bike Lifts

(4) Pulleys

(4) Hooks

(2) Long Ropes

(2) Tie Down Bar

11' Hoist 15' Wall Drywall Lift Panel Hoist Dry Wall Jack Lifter Tools Contractors

11' Hoist 15' Wall Drywall Lift Panel Hoist Dry Wall Jack Lifter Tools Contractors Review

Now you can get your drywall done without spending too much money. Our heavy-duty drywall lift can help you get your job done faster and easier, perfect for commercial or home use. It's sure to do all the heavy and hard work for you.

FEATURES:

1 Person operation

150 lbs load limit

Sturdy welded steel construction

5" caster wheels for easy rolling

Built-in winch with brake

Hoist tilting for ceilings and walls

Single sheet capacity: 4ft x 16ft

Horizontal ceilings min: 4ft

Horizontal ceilings max reach: 11ft, angled ceiling Up to 15ft

Optional extension bar lift drywall up to 15ft Max (which determined by 11ft maximum lift and 1/2 the length of drywall)

Quick and easy assembly

Product weight: 105lbs

CM BEHC0116-ZHK-3LB Budgit Electric Chain Hoist, 1 Ton Capacity, 11' Lift Height, 16FPM Lift Speed, 1HP, 230/460V

CM BEHC0116-ZHK-3LB Budgit Electric Chain Hoist, 1 Ton Capacity, 11' Lift Height, 16FPM Lift Speed, 1HP, 230/460V Review

CM BEHC0116-ZHK-3LB Budgit Electric Chain Hoist, 1 Ton Capacity, 11' Lift Height, 16FPM Lift Speed, 1HP, 230/460V Feature

• Gearing totally enclosed in oil-bath lubrication for long life, High-torque H4 rated heavy duty motor with Class 'F' insulation with thermal actuated switches embedded in the motor winding for protection from overheating
• Weatherproof NEMA-4X enclosed push-button control station, Paddle type upper and lower control limit switch
• Powder coat finish provides long lasting durable finish and added resistance to corrosive environments
• Manguard overload protection prevents lifting excessive loads
• All hoists are built in compliance to ASME/ANSI B30.16 & ISO certified and NEC electrical codes
• Load brake included
• 5 feet of power supply cord
• 7 feet pendant drop

Budgit Manguard Hoists are designed for H4 duty, which means most heavy-duty industrial applications. Budgit's range of specifications and features have made it the perfect solution for thousands of hoists sold in industries such as automotive, machine shops, chemical plants, marine etc.

CM BEHC5016-ZHK-1LB Budgit Electric Chain Hoist, 1/2 Ton Capacity, 23' Lift Height, 16FPM Lift Speed, 1/2HP, 115/230V

CM BEHC5016-ZHK-1LB Budgit Electric Chain Hoist, 1/2 Ton Capacity, 23' Lift Height, 16FPM Lift Speed, 1/2HP, 115/230V Review

CM BEHC5016-ZHK-1LB Budgit Electric Chain Hoist, 1/2 Ton Capacity, 23' Lift Height, 16FPM Lift Speed, 1/2HP, 115/230V Feature

• Gearing totally enclosed in oil-bath lubrication for long life, High-torque H4 rated heavy duty motor with Class 'F' insulation with thermal actuated switches embedded in the motor winding for protection from overheating
• Weatherproof NEMA-4X enclosed push-button control station, Paddle type upper and lower control limit switch
• Powder coat finish provides long lasting durable finish and added resistance to corrosive environments
• Manguard overload protection prevents lifting excessive loads
• All hoists are built in compliance to ASME/ANSI B30.16 & ISO certified and NEC electrical codes
• Load brake included
• 5 feet of power supply cord
• 19 feet pendant drop

Budgit Manguard Hoists are designed for H4 duty, which means most heavy-duty industrial applications. Budgit's range of specifications and features have made it the perfect solution for thousands of hoists sold in industries such as automotive, machine shops, chemical plants, marine etc.

Maasdam 48610 Lever Hoist 1-1/2 Ton, Black

Maasdam 48610 Lever Hoist 1-1/2 Ton, Black Review

Maasdam 48610 Lever Hoist 1-1/2 Ton, Black Feature

• Automatic Brake system holds load in any position
• Freewheeling feature without load for quick load attachment
• All Steel construction with durable Powder Coat Finish
• Drop forged Hooks with heavy duty safety Latches swivel 360° for easy rigging
• Conforms to ANSI ASME

For pulling, lifting, or dragging loads. Meets OSHA specifications.
No. 48600: 3 4 T, 1 1 8 T test load, 5' standard lift, 1 4'' chain diameter, 13'' minimum distance between hooks, 13 1 2'' handle length
No. 48610: 1 1 2 T, 2 1 4 T test load, 5' standard lift, 5 16'' chain diameter, 15 3 16'' minimum distance between hooks, 19'' handle length

R&M Hoists RM Series II EZ Lift Manual Chain Hoist with Single Fall, 1.5 ton Capacity, 10' Lift Height

R&M Hoists RM Series II EZ Lift Manual Chain Hoist with Single Fall, 1.5 ton Capacity, 10' Lift Height Review

R&M Hoists RM Series II EZ Lift Manual Chain Hoist with Single Fall, 1.5 ton Capacity, 10' Lift Height Feature

• High strength, grade 80 alloy steel load chain
• Designed for Industrial Use
• Individually serialized and tested for 125% rated load
• Meets or exceeds international standards
• Additional lift chains available

This R&M Hoists EZ Lift Series II Manual chain hoist, 1.5 ton capacity, single fall with 10' lift features high strength, grade 80 alloy steel load chain with galvanized finish for corrosion resistance. Hooks are alloy steel, heat treated and equipped with hook latches and inspection points. Dual pawl weston-style brake with two brake friction discs provides four braking surfaces. Designed for industrial use; RM Series II manual chain hoist meets or exceeds international standards, including ASME B30.16. Read the installation, operation and maintenance manual for safe operation. One year warranty - details @ http://wwwrmhoistcom/downloads/standardwarranty.pdf. Assembled and tested in Springfield Ohio. Each unit is individually serialized and is provided with a load test certificate; all R&M manual chain hoists and lever hoists are statically and dynamically tested with a minimum of 125% rated load prior to shipping. Hand chain is 2 ft less than lift. Additional lifts available. Overload limiting device to prevent lifting loads beyond rated capacity.